1. 1
  2. 2
  3. 3
  4. 4
  5. 5

INNOVATIVE FUNCTIONS AND DESIGN

The SX luminaire series features patented precision optics for precise light distributions, optimum glare control for efficient visual comfort, modern driver technologies for sophisticated and comfortable light management and LEDs with spectrums close to natural light. With its minimal dimensions it offers maximum flexibility.

test

NEW: Ontero SX

 

With its filigree design, the extension of the SX luminaire series fits effortlessly into any ceiling design and skilfully draws attention to the presentation area.

Ontero SX

      test

      3 WATTAGES

      7 W (150 mA) . 15 W (400 mA) . 23 W (600 mA)

      5 LIGHT COLOURS

      927 . 930 . 935 . 940 . BeNature

      4 BEAM ANGLES

      Flood 40° . WideFlood 60° . Downlight 60° . WallWash

      test

      EFFICIENCIES

      Luminaire luminous fluxes: up to 1,760 lm
      Luminous efficacy: up to 83 lm/W

      CONTROLS

      On/Off
      Casambi
      DALI

      ACCESSORIES

      Feed-through wiring set
      Concrete installation housing

      test

      Intara SX a little miracle of light and space

      One of the most striking design features of the luminaires is their red anodised cooling element. Installed without tools it has a wow-effect – symbolising the high performance of the SX series despite its small size. 40 mm light exit opening, 70 mm installation opening, 70 mm luminaire height, 90 mm installation depth: these luminaire dimensions allow a high degree of flexibility in planning and positioning.

      Patented precision optics from the light laboratory.

      The cumulus-shaped arrangement of the free-form surfaces produces an extremely homogeneous light cone.

      The cumulus-shaped arrangement of the free-form surfaces produces an extremely homogeneous light cone.

      Homogeneous wallwashing with SX Wallwash and accent lighting with SX directional spots.

      Homogeneous wallwashing with SX Wallwash and accent lighting with SX directional spots.

      The reflectors from the renowned Bartenbach light laboratory ensure that the light is distributed with sharp edges.

      The reflectors from the renowned Bartenbach light laboratory ensure that the light is distributed with sharp edges.

      Details overview

      Aufbauleuchte NEW: Ontero SX

      The filigree design of the luminaire blends effortlessly into any ceiling design and skilfully draws attention to the presentation area.

      Technical description
      Surface-mounted luminaire, rated life of the LED L80/B10 > 50000 h, colour rendering index CRI > 90, chromaticity tolerance 2 SDCM (initial), miniaturized, vaporized plastic reflector, microfasetted, patented free-form optics (Bartenbach®) with clear and precise light distribution pattern, Reflector holder in plastic, black, high-gloss, reflector support ring with threaded connection and air inlet, die-cast aluminum, silver, housing and bracket in die-cast aluminium, powder-coated, Luminaire housing designed as a heat sink, black, Joint cover in housing color with decorative ring, edge area silver, matt (matt gold with Edition) rear perforated sheet metal cover for housing ventilation, rotation angle 360°, swivel angle +/- 90°, inclusive, On/Off, 220-240 V 50/60Hz, 400 mA, max. 36 luminaires per circuit (B16A fuse), camera-compatible, up to 2.5 KV interference resistance

      Show configuration

      Recessed luminaire Intara SX Directional spot

      Intara SX directional spots are fitted with either a 40° flood or a 60° WideFlood reflector. The slightly protruding reflector insert and the large rotation and adjustment angle enable simple alignment of the luminaire.

      Technical description
      Recessed directional spot with LED, rated lamp lifetime LED L80/B10 >50,000 h, colour rendering index CRI > 90, chromaticity point tolerance 2 SDCM (initial), metallised plastic reflector, microfacetted, patented free-form optics with clear and precise light distribution pattern, cooling element die-cast aluminium, anodised red, die-cast aluminium mounting ring, powder coated, pivot angle 220°, adjustment angle +/- 20°, clamping springs for ceiling mounting, including fixed driver unit, camera compatible, up to 2.5 KV interference resistance, protection category IP 20, protection class III, weight 0.5 kg

      Show configurations

      Recessed luminaire Intara SX Downlight

      The special properties of the reflector, the minimal reflector opening of 40mm and the recessed position of the light source combine to produce an excellent UGR valuemof <19 for the downlight, ensuring glare-free workplace illumination  in conformity with standards.

      Technische Beschreibung
      Recessed downlight with LED, rated lamp lifetime LED L80/B10 >50,000 h, colour rendering index CRI > 90, chromaticity point tolerance 2 SDCM (initial), metallised plastic reflector, microfacetted, patented free-form optics with clear and precise light distribution pattern, reflector trim designed as shadow gap, polycarbonate (PC), high-gloss black, cooling element die-cast aluminium, anodised red, die-cast aluminium mounting ring, powder coated, clamping springs for ceiling mounting, including fixed driver unit, camera compatible, up to 2. KV interference resistance, protection category IP 20, protection  class III, weight 0.5 kg

      Shwo Configurations

      Recessed luminaire Intara SX Wallwasher

      Thanks to its special geometry, the WallWash reflector fulfils two functions at once – ceiling-flush, homogeneous illumination of the vertical walls and  illumination of the horizontal ceiling  without the luminaire protruding from the ceiling.

      Technical description
      Recessed wallwasher with LED, rated lamp lifetime LED L80/B10 >50,000 h, colour rendering index CRI > 90, chromaticity point tolerance 2 SDCM (initial), metallised plastic reflector, microfacetted, patented free-form optics with asymmetric light distribution pattern, reflector trim designed as a shadow gap, polycarbonate (PC), high-gloss black, cooling element die-cast aluminium, anodised red, die-cast aluminium mounting ring, powder coated, pivot angle 120 °, clamping springs for ceiling mounting, including fixed driver unit, camera compatible, up to  2.5 KV interference resistance, protection category IP 20, protection class III, weight 0.5 kg

      SHOW configurations